Features of Automatic Softener Valve RUNXIN F78A3:
1) Distribution valve adopts hermetic heard faces for opening and closing. Main valve structure is composing by four pieces of triple ways piston valves. Distribution valve and main valve are considered one set.
2) Sampling valve on outlet.
3) Outlet and Drain adopt UPVC pipe by sticking. It comes with animated connector.
4) It could be used in filtration system.
5) It is installed by side-mounted.
6) Brine refill is controlled by electronic ball valve. Brine is refilled while in service.
7) It is controlled by volume.
8) It has signal output connector.
9) It has function of interlock.
10) It has remote controlling connector.
Technical Parameter:
1) Control Mode: Automatic/Volume Type/Down-flow Reg.
2) Suited Pressure: 0.2~0.6MPa
3) Suited Water Temperature: 5--45 degree Celsius
4) Transformer Input: 100-240V/50-60Hz
5)Maximal Water Treatment Capacity: 40 m3/h
6) Tank Diameter for matching: 36"- 63"
7) Water Inlet/Outlet: DN65(connect with outer diameter 75OD UPVC pipe by sticking)
8) Drain Outlet: DN65(connect with outer diameter 75OD UPVC pipe by sticking)
9) Brine Line Connector: 3/4"M (Male Thread)
10) Top and bottom strainer: DN80 (connect with outer diameter 90OD UPVC pipe by sticking)
Range of Application:
Boiler softening water system
RO pre-treatment system
Swimming pool filters equipment
Ion exchange equipment
Packing: 2 SETS / CTN
Audited Supplier 
){kind=link}